XX134-40-00 Camera Dome Warning: To reduce a risk of fire or el
Preset 95 (Auto-Baud Detect Feature) — Auto-baud detect functions after installing defaults, using preset 95, when switching Vicoax to NOVA (VPS) and
Programming Menus The Main Programming Menu is the first one seen when entering programming mode (store preset 94). Subsequent menus, called sub-menu
These menu settings do not affect the camera speed when acquiring a preset target. Presets are solved at the fastest possible speed regardle
Camera Controller The next menu, Camera Controller, takes advantage of the Digital Signal Processor (DSP) in the camera to adjust functions tradition
If the SurveyorVFT is equipped with a 23x Infra-Red (IR) NTSC or PAL version camera, the Night Mode Control menu will appear (see Menu example). This
The Shutter Speed menu is used to scroll through the various speed options on the camera’s automatic shutter (default setting is automatic). As w
The Backlight Compensation menu allows adjustment of this setting. Backlight compensation improves the contrast of a silhouetted image when it is
The White Balance allows the user to override the automatic color correction feature in the SurveyorVFT. To adjust the red and blue gain, white
The Sector Censoring screen (22X and 23X cameras only) is designed to disable the video in areas that do not require surveillance. It is often used to
The Video Defaults menu sets all the camera video settings to the default settings without affecting other functions, such as presets and tours. Priva
Alarm Handling The Alarm Input Controller menu is used to program the tremendously flexible alarm processing features of the SurveyorVFT
The Acknowledge Mode menu determines whether an alarm is acknowledged manually by the operator, momentary so the alarm remains activ
Relay Driver The Relay Driver menu allows selection of the relay output function. Sub-menus here allow setup of the output type (latching or momenta
The Enable Title Text menu functions similarly to the All Titles option. This allows the user to individually turn off any of
Preset/Tour Handler The Preset/Tour Handler function manages the 79 presets, 8 tours and 2 autotours resident in the SurveyorVFT. These fe
attempts to move the camera while motion detection is enabled and the preset solved, the dome will hesitate a second to turn off motion detection befo
The Configure Autotour allows configuration of the autotour feature. There are two autotours, numbers 88 and 89. The autotour feature allows the user
Scheduler/Time of Day The Scheduler/Time of Day sub-menu allows configuration of the SurveyorVFT time base and actions. The Time Controls
The Program Timed Events option allows the programming of an action once or weekly on a selected day. The programmable actions ar
Install Defaults Finally, the Install Defaults option restores all SurveyorVFT settings to their factory defaults. This affects all programmed funct
Important Safeguards 12. Power Cord Protection - Power supply cords should not be routed in trafficked areas or in tight spaces where they will be pin
Competitive Protocols SurveyorVFT provides the ability to work with certain competitive protocols. This section briefly describes the use of the onsc
Vicon Standard Equipment Warranty Vicon Industries Inc. (the “Company”) warrants your equipment to be free from defects in material and workmanship un
Vicon Industries Inc. Corporate Headquarters 89 Arkay Drive Hauppauge, New York 11788 631-952-CCTV (2288) 800-645-9116 Fax: 631-951-CCTV (2
FCC Notice Note: Complies with Federal Communications Commission Rules & Regulations Part 15, Subpart B for a Class A digital device. WARNING
Contents Introduction ...1 Softw
Introduction This manual details the programming features of the SurveyorVFT, software revision 1.0.1. This manual is intended to be used in conjuncti
NOTES 2 XX134-40-00 Rev 104 SurveyorVFT Camera Dome Programming
Software Features Most of the SurveyorVFT features are accessed remotely through either a System Console (V1400X-DVC-3), keypad (V1410X-DVC, V1411X-DV
Kommentare zu diesen Handbüchern