Vicon SVR-P Betriebsanweisung PDF herunterladen (Seite 28)

Digital Video Recorder User Guide

Changing Passwords

If you have the correct permission, you can change user passwords.

1.IntheChangeP/Wrow,selecttheuserwhosepasswordyouwanttochange.

2.ANewPasswordsubmenuopens,inwhichyouenterthenewpassword.

 ·EnterthenewpasswordusingeitherthenumberbuttonsontheSVR-1670’sfrontpanelor

theon-screenkeyboard.

 ·Passwordsmustbean8-digitnumberbutcanbeanynumbersinanysequence

3.ClicktheChangebutton.

Chapter 6. Using the System Setup Menu

Figure 6.3.2 Changing a Password

Figure 6.3.3 New Password submenu

Figure 7.1.1 Network Submenu for the Type Ethernet (on the Communication Menu)

Chapter 7. Communication To/From the DVR

TheCommunicationmenuoptionsallowyoutocongureforcommunicationtoandthrougha

network,aDDNSserver,NTPsynchronization,andremotecontroldevices.

These topics are explained in the following sections :

▶7.1SettingupNetworkCommunication

▶7.2RegisteringwithaDDNS.

▶7.3SettingupforNTPSynchronization

▶7.4SeeSettingupRemoteControl

▶7.5SeeSettingupStreaming

▶7.6SeeSettingupIPFilter

7.1. Setting up Network Communication

Before you enter settings on the Network submenu, you need to know the type of network connected

to the DVR. The type is either :

• Ethernet, if the DVR is connected to dedicated line, cable modem or LAN.

• xDSL, if the DVR is connected to a PPPoE-type xDSL line.

Setting Up for Ethernet

ThissectiondiscussestheoptionsavailableifyourNetworkTypeisEthernet.

Option Setting

Type

Ethernet is the correct type if the DVR is connected to dedicated line, cable modem

or LAN.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 64 65

Keine Kommentare

Vicon SVR-P Betriebsanweisung Seite 28