Vicon CE102D Installationsanleitung

www.vicon-security.com XX268-00-00CE102D Network Indoor Camera DomeVicon Industries Inc. does not warran

102.2 Connection • Connection Cable • Connecting to the RJ-45 Connect a standard RJ-45 cable to the network port of the net

112.3 Network Connection and IP assignment The network camera is designed for use on an Ethernet network and requires an IP address for access. Most

123. Operation The network camera can be used with Windows® operating system and browsers. The recommended browsers are Internet Explorer®, Safari®,

133.2. Access from the internet Once connected, the network camera is accessible on your local network (LAN). To access the network camera from the

141) General controls Live View Page Search & Playback Page Setup Page Help Page The video drop-down list al

153.5 Network Camera Setup This section describes how to configure the network camera, and is intended for product Administrators, who have unrestri

161) Users User access control is enabled by default. An administrator can set up other users, by giving these user names and passwords. It is also

172) Network The network camera supports both IP version 4 and IP version 6. Both versions may be enabled simultaneously, and at least one version m

183) Video & Image • Stream1 Setting - Codec: The codec settings are separated into MPEG4 and H.264. H.264

19 * MPEG4 SP (Simple Profile): Mostly aimed for use in situations where low bit rate and low resolution are mandated by other conditions of the app

2WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENINGS ON THE EQUI

20• Stream2 Setting Sometimes the image size is large due to low light or complex scenery. Adjusting the frame rate and quality helps to control th

21• New Server Time Select your time zone from the drop-down list. If you want the server clock to automatically adjust for daylight savings time,

223.5.3 Video & Image  Basic Refer to “3.5.1 Basic Configuration > Video & Image” for more details.

23 Image • Image Appearance This page provides access to the advanced image settings for the network camera.

24  AE & AWB • Exposure control This page provides access to the advanced exposure control settings for t

25• White Balance Control This adjusts the relative amount of red, green and blue primary colors in the image so that the neutral colors are

26• Day & Night Control - Mode: Select the day/night mode from among three modes. * Automatic: Normally works in day mode; switches automat

27The privacy masks are configured by Mask windows. Each window can be selected by clicking with the mouse. It is also possible to resize, delete or

283.5.4 Event 1) Event-In  On Boot This is used to trigger the event every time the network camera is started. Select “Enable

29  Manual Trigger This option makes use of the manual trigger button provided on the Live View page, which is used to start

3 FCC COMPLIANCE STATEMENT INFORMATION TO THE USER: THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE,

30  Motion Motion detection is used to generate an alarm whenever movement occurs (or stops) in the video image. A tot

31 To create a motion or mask window, follow steps: 1. Click the right button of mouse to see the mouse menu. 2. Select New Motion (or Mask)

32  Network Loss This is used to trigger the event every time the network connection is failed. Select “Enable network loss”

33 2) Event-Out  SMTP (E-Mail) The network camera can be configured to send event and error email messages via SMTP (

34 SMTP authentication, you must define the weakest authentication method allowed. - Login Method: Set the weakest method allowed to the highest/sa

35 - Remote directory: Specify the path to the directory where the uploaded images will be stored. If this directory does not already exist on the F

36 When the setup is complete, the connection can be tested by clicking the Test button. ▼ Record When the net

37 • Record Schedule The weekly recording schedule can be set for each day. Drag or click a box area; clicking the block toggles the recording betw

38 ▼ Event Notification When the network camera detects an event, it can send a message to a designated server that this event

39 The event map allows you to change the settings and establish a schedule for each event trigger from the network camera; up to a max. 15 events ca

4 IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do

403.5.5 System 1) Information You can enter the system information. This page is very useful as a reference for information after installation.

412) Security  Users User access control is enabled by default, when the administrator sets the root password on first access.

42 HTTPS For greater security, the network camera can be configured to use HTTPS [Hypertext Transfer Protocol over SSL (Secu

43 IP Filtering Checking the "Enable IP address filtering" box enables the IP address filtering function. When the

44 OpenVPN OpenVPN is an open source software application that implements virtual private network (VPN) techniques for creating secure point-to-poi

45• Server Mode Configuration - Protocol type: Choose Protocol type, either UDP and TCP; UDP is preferred. - Port: Type in Port number to use,

463) Date & Time • Current Server Time This displays the current date and time (24h clock). The time can be displayed i

474) Network Setting in regard to network can be executed. Settings for IP, DNS, Host Name, Port, and ARP/Ping can be

48 * Default router: Specify the IP address of the default router (gateway) used for connecting devices attached to different networks and netw

49 DDNS • Internet DDNS (Dynamic Domain Name Service) When using the high-speed Internet with the telephone or cable netw

5Contents 1. Description ------------------------------------------------------------------6 1.1 Components - ------------------------------------

50 RTP Create a setting for sending and receiving video on a real-time basis. These settings are the IP address, port

51 UPnP The network camera includes support for UPnP™. UPnP is enabled by default, so the network camera is automatically dete

52 • DSCP Settings For each type of network traffic supported by your network video product, enter a DSCP (Differentiated Ser

53 NAT A broadband router allows devices on a private network (LAN) to share a single connection to the Internet. This is done by forwarding netwo

54• NAT traversal Settings - Enable: Click the Enable button to enable NAT traversal; pressing the button toggles between enable and disable. When

55Zero configuration networking allows devices such as computers and printers to connect to a network automatically. Without zeroconf, a network admi

565) Language Select a user language. The language choices are English, Russian, Korean and Chinese.

576) Maintenance • Maintenance - Restart: The unit is restarted without changing any of the settings. Use this metho

58• Backup Click the Backup button to save setting values that users enter to the network camera to a user PC. • Restore Click the Restore b

59• Health Check - System Check: Click the System Check button to get the important information about the camera’s system resources. The pop

61. Description The information in this manual provides quick installation and setup procedures for the CE102D Series of Camera Domes. These units s

60- Networks Check: Click the Network Check button to get the information about the camera’s network setting and traffic. The pop-up window displays

613.6 Playback The Playback window contains a list of recordings made to the memory card. It shows each recording's start time, length, the eve

62 Zoom In: zoom in the video clip Full Screen: display full screen of the video. (3) Time Chart Display an hour-based search screen for th

633.7 Help The Help information window will be provided as a popup window so that users can open and read it without a need for log-in. It will offe

643.8 Resetting to the factory default settings To reset the network camera to the original factory settings, go to the Setup>System> Maintena

654. Appendix 4.1 Troubleshooting Troubleshooting if problems occur, verify the installation of the network camera with the instructions in this ma

664.2 Preventive Maintenance Preventive maintenance allows detection and correction of minor that faults before they become serious and cause equipm

674.3 Product Specification Main Item Specification Image sensor 1/2.8” Progressive scan RGB CMOS Active Array 1920(H) x 1080(V) Lens Fixed 3.7m

68System Requirement for Web Browser Operating System: Microsoft® Windows® OS Series CPU: Intel® Core 2 Duo 2GHz or higher, 1GB RAM or more, 10GB fr

Shipping Instructions Use the following procedure when returning a unit to the factory: 1. Call or write Vicon f or a Return A uthorization ( R.A.

7 1.2 Key Features • Brilliant video quality The network camera offers the highly efficient H.264 video compression, which drastically reduces ba

Vicon Standard Equipment Warranty Vicon Industries I nc. ( the “ Company”) w arrants y our equ ipment t o b e f ree f rom defects i n material and wo

CE102D Network Indoor Camera Dome

82. Installation 2.1 Camera Installation Carefully remove the contents from the box and verity that nothing was damaged in shipment. 1) Using the

9 Locking Screw  Camera Dimension Refer to the diagrams below for exact dimensions.