Vicon CE102B Spezifikationen PDF herunterladen (Seite 10)

Quick Installation Guide

3.5 Network Camera Setup

This section describes how to configure the network camera, and is intended for product

Administrators, who have unrestricted access to all the Setup tools; and Operators, who have access

to the settings for Basic, Live View, Video & Image, Event, and System Configuration.

You can configure the network camera by clicking Setup in the top right-hand corner of the Live View

page. Click on to access the online help that explains the setup tools

When

accessing the network camera for the first time, the

“Admin Password” dialog appears. Enter your admin name

and password, set by the administrator.

Note: If the password is lost, the network camera must

be reset to the factory default settings.

See “3.6 Resetting to the Factory Default Settings”. The

default administrator username is “ADMIN” and

password is “1234”.

3.6 Resetting to the factory default settings

To reset the network camera to the original factory settings, go to the Setup>System >Maintenance

web page (described in “3.5.6 System>Maintenance” of the User’s Manual) or use the Reset button on

the network camera, as described below:

Follow the instructions below to reset the network camera to the factory default settings using the

Reset button.

Reset Button

emove the front cap

1 2 ... 5 6 7 8 9 10 11 12

Keine Kommentare

Vicon CE102B Spezifikationen Seite 10