Vicon CE202D-N Installationsanleitung PDF herunterladen (Seite 57)

• NAT traversal Settings

- Enable: Click this button to enable NAT traversal. When enabled, the network camera

attempts to configure port mapping in a NAT router on your network, using UPnP. Note

that UPnP must be enabled in the network camera (see System>Network>UPnP).

Enter a NAT router and enter the external port number for the router in the field provided.

If you enter o in those fields, the network camera automatically searches for NAT

routers on your network.

Notes:

- If you attempt to manually enter a port that is already in use, an alert message will be

displayed.

- When the port is selected automatically it is displayed in this field. To change this enter a

new port number and click Save.

When the settings are complete, click Save, or click Reset to revert to previously saved settings.

 Zeroconfig

Zeroconfig allows the network camera to create and assign IP address for network cameras and

connect to a network automatically.

Zero configuration networking (zeroconf), is a set of techniques that automatically creates a usable

Internet Protocol (IP) network without manual operator intervention or special configuration servers.

Zero configuration networking allows devices such as computers and printers to connect to a network

automatically. Without zeroconf, a network administrator must set up services, such as Dynamic Host

Configuration Protocol (DHCP) and Domain Name System (DNS), or configure each computer

network

settings manually, which may be difficult and time-consuming.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 73 74

Keine Kommentare

Vicon CE202D-N Installationsanleitung Seite 57