Vicon SVFT-W23C Bedienungsanleitung PDF herunterladen

TCP/IP, Fiber and

Twisted-Pair Camera Dome

• RS-422/485 standard, available with TCP/IP,

fiber and UTP transmission card options

• ViconNet (TCP/IP) converts to digital video

for viewing and control on Kollector Elite and

Pro Digital Video Recorders and ViconNet

workstations

• Fiber-optic option transmits video and

control data to fiber optic receivers over long

distances

• UTP option transmits video up to 3000 ft over

unshielded twisted pair

• DIP-switch selectable competitive camera

dome protocols eliminate the need for

external translators

• On-board memory retained in housing;

designed for easy installation and servicing

• 360° continuous rotation pan-and-tilt drive

with a variety of color domes available

• Color 18X, 22X and day/night 23X camera

options, maximum 276X optical/digital zoom

• Indoor or outdoor, ceiling or pendant

configurations

• Digital Slow Shutter feature for enhanced

low-light applications

• Outdoor version provides environmental

protection, pressurized and maximum

security (MSH) versions available

• Convenient integration into any existing

CCTV matrix system

• GUI provides configuration of all features

SurveyorVFT Camera Dome System is a compact, lightweigh

and intelligent security device comprised of a camera, pan/tilt

drive, receiver and CPU-based electronics all in an attractive and

covert enclosure. SurveyorVFT can be programmed and

operated using any V1300X/V1400X/1500 series of NOVA™

communication devices and enhanced VicoaxII enhanced

protocol. It is available in a variety of indoor and outdoor version

and can be configured with a variety of camera and lower dome

types. Refer to Table 1.

he basic SurveyorVFT provides video transmission over coaxial

cable. Options are available that provide TCP/IP (ViconNet), fiber-

optic and twisted-pair (UTP) video transmission. Each of thes

options includes an interface board that allows the specific typ

of video transmission. An appropriate receiver is required.

he ViconNet option provides support for network connection t

Kollector Elite Digital Video Recorders and ViconNet

orkstations via ViconNet software. A pre-installed LAN interfac

board allows direct plug-in to a system network switch. Vide

from the camera is available to all network recorders and

workstations for live view and recording.

he Vicon SurveyorVFT camera dome can be used in

conjunction with competitive PTZ drivers through DIP-switch

selection.

he SurveyorVFT is designed for easy snap-in installation. Th

drive simply snaps into the housing. When removed, the housing

retains all programmed functions in its on-board memory. Th

customer interface board snaps down for easy access and th

PCB provides removable terminal blocks for simple wiring

connections.

Several mounting accessories are available to fit almost an

installation need. Refer to Table 1 for specific SurveyorVF

models and mounting options.

here are 79 programmable preset positions, each having

variable preset solve accuracy of 0.23º. Programmable azimuth

and compass is displayed on screen. There are 8 compas

headings (N, NE, E, SE, S, SW, W, NW) (22X/23X only) and pan

and tilt degrees displayed with a 1º resolution. 16 individua

programmable privacy masks are available. Motion detection

capability is available on day/night models. For each preset, ther

are 6 programmable zones for motion detection, each having

sensitivity levels.

larm inputs can be individually programmed. Programmabl

titling is provided for the camera and every preset position, alarm,

relay and sector and titles can be enabled or disabled individuall

or globally.

Eight tours (4 on 18X) are available with 32 steps per tour. Pan

and tilt functions are externally controlled, continuously variabl

and programmable to be enabled or disabled. There is

programmable autopan function.

icon strongly recommends the use of uninterruptibl

power supply systems (UPS) to prevent voltag

luctuations that can affect operation, cause video loss

and damage to the equipment.

Product Specification

Model No:

SurveyorVFT

Product Code:

See Table 1

SEC: 3 SPEC: V134 REV: 1203

Vicon part number 8009-7134-00-00 Product specifications subject to change without notice.

1 2 3 4 5 6 ... 10 11

Inhaltsverzeichnis

Seite 1 - Product Specification

TCP/IP, Fiber andTwisted-Pair Camera Dome• RS-422/485 standard, available with TCP/IP,fiber and UTP transmission card options• ViconNet (TCP/IP) con

Seite 2

Model NumbersSVFT-C18, SVFT-P18, SVFT-W18 SVFT-C18C, SVFT-P18C, SVFT-W18CProduct Codes8700-00, 8703-00, 8706-00 8700-01, 8703-01, 8706-01FormatsSpecif

Seite 3 - Contractors’ Specification

Technical Information89 Arkay Drive Hauppauge, NY 11788 www.vicon-cctv.comTEL:

Seite 4

Model NumberProductCodeEnvironment/ CableTypeCameraType/FormatMount TypeOptical Zoom/ TotalZoomLower Dome TypeSVFT-C22 8701-00 Indoor/Coax Color/NTSC

Seite 5

Model Number Product Code DescriptionSVFT-UWM 8352 Wall mount, indoor/outdoorSVFT-UCM 8351 Ceiling mount, indoor/outdoorSVFT-UPM 8348 Parapet mount, o

Seite 6

D. There shall be 79 programmable preset positions available, each having a variable preset solve speed of1 sec (nominal) and accuracy of 0.23°. The d

Seite 7

N. Motion detection capability shall be available for the day/night camera. For each preset, there are 6programmable zones for motion detection. Each

Seite 8

Electrical motorized pan and tiltwith electronic control.Units available in color andday/night (NTSC/PAL) formatsand a variety of zoom and featurecapa

Seite 9

Programmable for camera,preset, sector, relay and alarms.Camera: 1 for each.Preset: 79 maximum.Sector: 16 maximum (22X/23Xonly).Alarm: 4 maximum.Indiv

Seite 10 - Technical Information

Distance ft (m)Indoor Outdoor24 VAC 28 VAC 24 VAC 28 VACWire Size(AWG)AnnealedCopper WireCoax, Fiber,UTPViconNetCoax, Fiber,UTPViconNetCoax, Fiber,UTP

Seite 11

Model NumbersSVFT-C22, SVFT-P22,SVFT-W22SVFT-C22C, SVFT-P22C,SVFT-W22CSVFT-C23, SVFT-P23,SVFT-W23SVFT-C23C, SVFT-P23C,SVFT-W23CProduct Codes8701-00, 8