Vicon XX247-20-04 Spezifikationen PDF herunterladen (Seite 10)

Quick Installation Guide

4.2. Access from the Internet

Once connected, the V-CELL-IP Camera is accessible on your local network (LAN). To access the

camera from the Internet you must configure your broadband router to allow incoming data traffic to

the camera. To do this, enable the NAT-traversal feature, which will attempt to automatically

configure the router to allow access to the camera. This is enabled from Setup > System > Network >

NAT.

For more information, see “3.5.4 System>Network>NAT” of User’s Manual.

4.3 Setting the admin password over a secure connection

To gain access to the camera, the password for

the default administrator user must be set. This

is done in the “Admin Password” dialog

box,

which is displayed

when the network camera is

accessed for setup the first time.

Enter your

admin name and

password, set by the

administrator.

Note:

The default administrator username is

“

ADMIN” and password is “1234”. If the

password is lost, the Network Camera must be

reset to the factory default settings. See

“4.6

Resetting to the Factory Default Settings”

4.4 Live View Page

The

Live View page comes in several

screen modes

, including 704 x 480

(576),

640 x 480, 352 x 240 (288),

and

320 x 240. Users select the most

suitable one

for their particular

installation

. Adjust the mode in

accordance with y

our PC

specifications and monitoring

purposes.

1 2 ... 5 6 7 8 9 10 11 12 13

Kommentare zu diesen Handbüchern

Keine Kommentare

Vicon XX247-20-04 Spezifikationen Seite 10

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitskameras Vicon XX247-20-04