Vicon IX 2000 L Bedienungsanleitung PDF herunterladen (Seite 189)

Chapter 9: Drive Management

9.5. Physical Drive Maintenance

9.5.1 Read/Write Test

Figure 9-31: The Physical Drive Maintenance Window

Step1. To access the Read/Write Test maintenance option, select the

Physical Drives icon from the functional navigation panel on

the left of the RAIDWatch screen.

Step 2. Select a new drive from the Front View window. A used drive

(one that previously included in a logical configuration) can

also be tested with the precondition that its reserved space needs

to be manually removed.

Step 3. Select Read/Write Test from the tabbed menus in the

Functions window.

Step 4. Verify listed drive slot number. Select the Test type as either

Read-only or Read/Write test.

Step 5. There are two configurable parameters related to the

Read/Write test: Error Occurrence and Recovery Process.

Use the pull-down menu to configure a preferable test

condition. The configurable options are listed below:

Error Occurrence: This item specifies firmware’s reactions if

any errors should be found during the Read/Write test. Options

are: No Action, Abort on Any Error, Abort on Hardware Errors.

Note that the definitions of drive errors are determined by the

interface type. For SATA disk drives, errors are interpreted

according to SATA 8-bit error encoding.

Physical Drive Maintenance 9-29

1 2 ... 184 185 186 187 188 189 190 191 192 193 194 ... 251 252

Keine Kommentare

Vicon IX 2000 L Bedienungsanleitung Seite 189