Vicon S10-CH Mini Spezifikationen PDF herunterladen (Seite 11)

XX134-44-02 Rev 710 SurveyorVFT Camera Dome Programming Programming Menus • 5

Programming Menus

The Main Programming Menu is the first one seen when entering programming

mode (store preset 94). Subsequent menus, called sub-menus, are accessible from

this point. When in programming mode, a function is entered by pressing the AP

(autopan) key. To back out of that function without changes, press the AI (autoiris)

key. Instructions are available on the screen for almost all functions. Since many of

the menus available on the SurveyorVFT are similar, not all are shown here. For

convenience, press the L-SPD (lens speed) button to display a black background.

The selections available on this menu can be summarized as follows:

System Settings — Allows the user to adjust the speed of the pan and tilt axes. Solving preset positions is

always done at full speed. This menu also controls the Zoom Scalable Pan/Tilt, Compass, PTZ Timeout, Address

Setting, Flip, Fan Speed, and Privacy Mask Zoom Level features (Frame Noise Reduction and CCD mode on

certain models).

Camera Controller — Permits user adjustment of the advanced video features available on the SurveyorVFT.

Alarm Handling — Configures the SurveyorVFT’s four alarm inputs.

Relay Driver — Adjusts and configures the relay output for control of external devices.

Source Titling — Programs and displays the various titles available to the SurveyorVFT.

Note: All titles are disabled from the factory and will not be displayed upon initial startup.

Preset/Tour Handling — Programs preset events into the camera dome. It also allows programming a series of

events or actions into a script called a Tour and Autotour and on 23X/35X versions, Motion Detection zone set up.

Scheduler/Time of Day — The Scheduler provides a means of programming events to occur at specific times of

the day. The Time of Day feature allows programming of the time display format. It allows selection of daylight

saving time, 12/24-hour format and actual setting of the time and date.

Language — Programs language format for titles and menus. Language choices are English, Spanish, French,

German and Italian. The word “Language” will continuously change between the five translated words, Language,

Idioma, Langue, Sprache and Lingua, to alert an operator that this prompt is related to changing the language.

When selected, the menus will immediately display the new language.

Install Defaults — Resets the SurveyorVFT to the factory default settings. All previously programmed titles and

settings are lost when this function is accessed, so keep a record of programmed settings. The main default

settings are listed in the Install Defaults section. Some default settings are camera dependent; those are not

listed.

Note: On unit power up, when DIP switch SW2 positions 2, 6, 7 and 8 are all set to ON, the unit will perform an

Install Defaults.

System Settings

The System Settings menu varies according to the SurveyorVFT model being

programmed, as some of the cameras offer different features. The System

Settings menu allows adjustment of the mechanical parameters of the camera.

With the first two selections, Max. Manual Pan Speed and Max. Manual Tilt

Speed, the operator selects a maximum speed from a bar graph display. The

variable speed on the joystick will then range from zero at the center position to the

user defined maximum speed at full deflection. For 22XEX/23X/35X cameras, pan

is continuously variable from 0.1 to 360° per second (22X max. is 120º/sec), while

the tilt range is from 0.2 to 150° per second (22X max is 90º/sec). Note that the

pan and tilt controls remain variable speed across the full range of the joystick regardless of the maximum speed

setting. This feature allows the user to set the optimum speed for each individual camera. With the SurveyorVFT,

the operator is able to customize camera performance.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 41 42

Kommentare zu diesen Handbüchern

Keine Kommentare

Vicon S10-CH Mini Spezifikationen Seite 11

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitskameras Vicon S10-CH Mini