Vicon S10-CH Mini Spezifikationen PDF herunterladen (Seite 23)

XX134-44-02 Rev 710 SurveyorVFT Camera Dome Programming Programming Menus • 17

Relay Driver

The Relay Driver menu allows selection of the relay output function. Sub-menus

here allow setup of the output type (latching or momentary) and the relay power-

up state (on or off). Since these features are essentially configuration functions,

they will not be discussed in greater detail. For more information, refer to the

SurveyorVFT Installation & Operation Manual.

Source Titling

When Source Titling is selected from the programming menu, we enter the

Display Controller series of sub-menus. These control another powerful feature

of the SurveyorVFT, the ability to overlay numerous titles on top of the video

image without the use of external devices.

By using internal titles, a camera can take advantage of descriptive text even

when in standalone operation. In addition, all advanced titling features, like sector

titling and preset titling, are available to the operator even when the dome is

connected to devices that do not normally support these features.

The All Titles menu option allows enabling or disabling of all video titles. This is a

method of globally toggling all titles on or off. The factory default is all titles

disabled.

The Title Fade Control menu option on the Display Controller menu allows

selective title fading within a programmable time period. This permits initial

identification of the screen and eventual fading of the title until it disappears. The

maximum fade time is 99 seconds. The Sensor Fade is available on SVFT-PRS

pressurized units only.

The next option allows us to program the Camera Title. One line of 24 characters

may be dedicated to the camera title. Character selection is done with a series of

two menus, the first of which contains on-screen instructions. Several graphics

characters are also included and may be used as well.

The Preset Titles, Sector Titles, and Alarm Titles options are programmed in a

similar manner. Each preset has a title that appears on screen after the target is

acquired and disappears when any key is pressed on the keyboard controller

(including operation of the joystick).

The Sector Titles feature allows the operator to divide the 360° radius of the

camera into up to 16 “slices,” each with a separate title. In this manner, the title

can reflect the orientation of the camera, even when used in autopan mode. This

is an invaluable feature to any money handling areas (banks, casinos, racetracks,

and bars) where a camera can be used to also identify cash drawer names and

locations.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 41 42

Keine Kommentare

Vicon S10-CH Mini Spezifikationen Seite 23