Vicon S10-CH Mini Spezifikationen PDF herunterladen (Seite 13)

XX134-44-02 Rev 710 SurveyorVFT Camera Dome Programming Programming Menus • 7

A Fan Speed Control menu allows control of air circulation. There are two

modes available, Auto or Defog. In Auto mode the fan speed is proportional to

the unit temperature. In Defog mode, the fan speed is set to max speed to

achieve maximum air circulation for fast defogging.

The Privacy Mask Zoom Level menu allows the selection of the zoom value at

which the privacy mask is enabled.

The SurveyorVFT 23X and 35X models provide a Frame Noise Reduction

(FNR) menu that reduces file size of a digital image (by reducing the noise by the

field correlation), resulting in reducing bandwidth. There are 3 auto functions or it

can be disabled. Auto 1 has the weakest effect and Auto 3 has the strongest

effect. Note that with FNR enabled, an afterimage may appear in proportion to

the amount of FNR used. This is more noticeable if WDR is enabled.

The SurveyorVFT 35X model offers a selection of CCD Mode, with a choice of

Normal or High Sensitive mode. Note that both of these are Progressive mode,

which provides better vertical resolution, especially during motion. The High

Sensitive mode provides higher sensitivity, almost equivalent to interlace, without

losing any important features as is the case with interlace scan, but there may be

some residual motion artifact. The default mode is Normal.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 41 42

Keine Kommentare

Vicon S10-CH Mini Spezifikationen Seite 13