Vicon Roughneck V920D Series Installationsanleitung PDF herunterladen (Seite 14)

Seal around the

housing base

tightly using the

silicone.

Note: To assure a watertight seal, apply silicone sealant around the area where the base meets the

wall or ceiling. Vicon recommends Dow Corning® 737 neutral cure sealant or equivalent.

6. The camera/lens assembly can be adjusted to the desired position.

Do not move the

camera/lens assembly by holding onto the lens.

For pan and tilt adjustment, move the

camera mechanism in the desired direction. For roll adjustment (turns camera position

top/bottom), turn the gimbal in the desired direction. The varifocal lens can be manually adjusted

for focus (near/far) and zoom (telephoto/wide). Set the zoom position by using Zoom Lever Screw;

set the focus by using Focus Lever Screw. Refer to Lens Adjustment. When making adjustments,

be sure that the lens does not hit the dome and that the camera/lens is positioned for proper

orientation of video display.

 Adjusting the 3-Axis Gimbal

The gimbal mechanism yields maximum rotation and placement as shown below.

• Z-Axis: Rotation 355°

• Y-Axis: Tilting 70°

• X-Axis: Panning 355°

Models without IR LEDs Models equipped with IR LEDs

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 81 82

Keine Kommentare

Vicon Roughneck V920D Series Installationsanleitung Seite 14