Vicon Roughneck V920D Series Installationsanleitung PDF herunterladen (Seite 60)

4) Network

Setting regarding the network can be executed. Settings for IP, DNS, Host Name, Port, and ARP/Ping

can be established, along with setting for DDNS, uPnP, QoS, Zeroconfig, and Bonjour.

 Basic

• IP Address Configuration:

- Obtain IP address via DHCP: Dynamic Host Configuration Protocol (DHCP) is a protocol

that lets network administrators centrally manage and automate the assignment of IP

addresses on a network. DHCP is enabled by default. Although a DHCP server is mostly

used to set an IP address dynamically, it is also possible to use it to set a static, known

IP address for a particular MAC address. To obtain IP address via DHCP, check the radio

button.

- Use the following IP address: To use a static IP address for the network camera,

check the radio button and then make the following settings:

* IP address: Specify a unique IP address for your network camera.

* Subnet mask: Specify the mask for the subnet the network camera is located on.

* Default router: Specify the IP address of the default router (gateway) used for

connecting devices attached to different networks and network segments.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 81 82

Keine Kommentare

Vicon Roughneck V920D Series Installationsanleitung Seite 60