Vicon Roughneck V920D Series Installationsanleitung PDF herunterladen (Seite 35)

 AE & AWB

• Exposure Control

This page provides access to set the exposure and white balance of the network camera.

Configure the exposure settings to suit the image quality requirements in relation to lighting

considerations.

- Mode: Supports exposure modes to control the amount of light detected by the camera

sensor based on settings for light conditions. The default setting is Automatic with DC-IRIS.

* Automatic: Automatically sets the amount of light detected by the DC-IRIS and AGC.

* Hold Current: Fixes the exposure at its current state.

- Value: Select a value in the drop-down list to tune the exposure. The default setting is 5.

- AGC: Select a value in the drop-down list to specify the level according to the screen

luminance. The default setting is 36 dB.

- Enable automatic IRIS adjustment: This checkbox should always be checked,

except during focusing or when using a fixed iris lens.

- Enable Backlight Compensation: Set this checkbox to activate the BLC operation.

- Enable Flicker free: Set this checkbox to activate the flicker free operation.

- Flicker Mode: Provides the options for flicker.

* 50Hz: Select at 50 Hz environments.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 81 82

Keine Kommentare

Vicon Roughneck V920D Series Installationsanleitung Seite 35